Heat Pump Installation in South Auckland
We fit heat pumps in the older brick-and-tile homes and the new builds right across South Auckland. Tell us your suburb and what you're trying to warm, and we'll sort a quote.
Heat pump installation across South Auckland usually runs $2,500 to $6,000 fitted for a single room. We size the unit to your home, deal with the damp Manukau winters, and back the install with servicing. Most jobs are done in a day.
Why South Auckland homes feel colder than the thermometer says
The southern suburbs sit low and flat across the Manukau catchment, and winter here is damp and humid rather than sharply cold. That moisture soaks into walls and carpet, and a room at 16 degrees feels a lot colder when the air is wet. It's also why so many places down here fight condensation on the windows every morning.
A heat pump doesn't just push out heat. It dries the air as it warms the room, so the mould on the window reveals and the clammy feeling both back off. For homes in Otara, Mangere and Clendon Park that never quite shake the winter damp, that's the real win.
Fitting heat pumps into older southern suburbs homes
A lot of South Auckland is 1950s to 70s state and brick-and-tile housing. Solid walls, small windows, and often no insulation to speak of. Those homes hold the damp and lose heat, so unit placement and sizing matter more than the brand on the box. Get it right and a single high wall unit will carry an open-plan living area through winter. Get it wrong and you're paying to run a unit that never quite keeps up.
We look at your actual rooms before we quote, because a lounge that opens into the kitchen and hallway needs more grunt than the wall size alone suggests. Doing the heat pump installation done right from the start saves you the cost of a second unit later. If you want to understand the numbers first, our breakdown of heat pump installation cost lays it out plainly.
One room, the whole house, or a new build
Most homes start with one heat pump in the main living area, and for a lot of people that's all they need. If you want bedrooms warm too, a multi split system for larger homes runs several indoor units off one outdoor unit, which keeps the outside of the house tidy.
For the new builds going up in Flat Bush and Takanini, or a full renovation, it's worth looking at ducted whole-home heat pumps while the ceiling is open. On brand, we fit a range but a lot of our jobs are Daikin heat pumps because they're quiet and hold up well in our humid air. We'll tell you what suits your place rather than push the priciest option.
Servicing and the Warmer Kiwi Homes grant
We service and repair the heat pumps we installed ourselves. We don't take on servicing for units another company fitted, simply because we can't stand behind work we didn't do. So if you're weighing up who to use, know that the install and the after-care come from the same team.
On funding, some South Auckland households qualify for a subsidy toward a heat pump. You can check the Warmer Kiwi Homes grant eligibility and apply through EECA directly. We're not an EECA provider, so we can't process the grant for you, but we're happy to fit an approved unit once you're sorted.
Where we work around South Auckland
We cover Manukau, Manurewa, Papakura, Papatoetoe, Otara, Mangere, Takanini, Flat Bush, Otahuhu and Clendon Park. You can see all the areas we serve if you're just outside that list. We also handle heat pump installation in West Auckland and heat pump installation in Pukekohe and Franklin, so if your work spreads across the region we can help there too. Not sure we reach you? Give us a call on 09 234 2345.
Want a straight price for your home?
Send us your suburb and the rooms you want warm. We'll measure up and quote a fixed price, no pressure.
Common questions from South Auckland homeowners
How much does heat pump installation cost in South Auckland?
A single-room install in South Auckland typically runs $2,500 to $6,000 fitted, depending on the unit size and how far the outdoor unit sits from the indoor one. Older brick homes can cost a bit more if the pipe run is long or access is tight. We quote a fixed price after we've seen the room, so there are no surprises.
What size heat pump do I need for a brick-and-tile home?
For a typical 1950s to 70s brick-and-tile home with solid walls and little insulation, a lounge that opens into the kitchen usually needs a 5 to 7kW unit. A single closed bedroom might only need 2.5kW. Brick holds the damp and loses heat, so we size up rather than down and check the actual room before we commit.
Do you install heat pumps in Flat Bush and Takanini new builds?
Yes. We do a lot of work in the new builds going up around Flat Bush and Takanini. If the house is still being built or you're renovating, it's the ideal time to look at a ducted system while the ceiling space is open. If it's already finished, a high wall or multi-split works fine too.
Is a heat pump cheaper to run than an electric heater?
Usually, yes. A heat pump gives you around three to four units of heat for every unit of electricity, where a plug-in electric heater gives you one for one. So for the same warmth you'll pay a good deal less to run the heat pump, especially over a damp Manukau winter when the heating runs for hours.
Let's get your place warm and dry
We install and back our own work right across the southern suburbs. Call 09 234 2345 or send through your details for a quote.