Heat pump installation Auckland homes stay warm and dry with
We fit heat pumps in villas, bungalows and new builds from Ponsonby to Howick. Sized right for your rooms, sited to last, and tidied up before we leave.
Heat pump installation in Auckland means matching the right unit to your rooms, then siting it to handle our damp winters and coastal salt air. A standard high wall install usually takes a day. We supply and install, and we back the work we do ourselves.
What's included when we install a heat pump
A supply and install job with us covers the lot: we help you pick the unit, mount the indoor head and the outdoor condenser, run and insulate the pipework, wire it in, vacuum and charge the system, then test it and show you how to run it.
We tidy up before we go. No holes left rough, no mess in the garden. The install matters more than the sticker price on the box, because a unit that's mounted badly or charged wrong will never heat the place properly no matter how good the brand is.
After it's running we handle heat pump servicing on the units we've fitted, so it keeps working the way it did on day one.
Sizing and placement for Auckland's damp winters
Our winters aren't bitterly cold, they're damp. A heat pump that's sized only for raw heat output can leave a room warm but still clammy. We size for dehumidifying too, so the air actually feels dry and the house stops smelling musty.
Getting the size right beats chasing the biggest or grunty-est unit. Too big and it short-cycles and wastes power, too small and it runs flat out on the coldest nights and still can't keep up. If you want a rough idea before we visit, our heat pump sizing calculator gives you a starting point, and we confirm it on site.
Placement is part of the same job. We put the indoor head where the warm air reaches the whole living space, not tucked in a corner blowing at a wall.
Coastal salt air on the North Shore and eastern bays
If you're near the water in the eastern bays or on the Shore, salt air eats outdoor units. We site the condenser out of the worst of the spray where we can, and for exposed coastal homes we'll talk through units built to stand up to it.
It's worth spending a bit more on the right outdoor unit near the coast. A cheaper one corrodes faster and you're replacing it years sooner, so the saving disappears.
Choosing the right unit and system for your home
Most Auckland homes get a high wall heat pump in the main living area, and that's the cheapest, simplest option. But it's not the only one. If you want to heat several rooms or keep things out of sight, ducted heat pump systems spread the warmth through the whole house from a hidden unit.
We walk you through the types of heat pump that suit your layout, and we fit a range of brands including Mitsubishi Electric heat pumps. If money's tight, the Warmer Kiwi Homes grant covers up to 80% of the cost for eligible owner-occupiers, capped, and you apply through EECA directly.
For a clear breakdown of what a job like yours runs to, have a look at our guide to installation cost before you decide.
Want it sized right the first time?
Send us your rooms and we'll come back with an honest plan and price. Call 09 234 2345 or fill in the form.
Common questions about installing a heat pump
How long does it take to install a heat pump?
A standard single high wall install usually takes most of a day, sometimes half a day if the run is short and access is easy. Multi-room or ducted setups take longer, often a couple of days. We'll give you a realistic timeframe when we quote so you can plan around it.
Where is the best place to install a heat pump in the house?
For most homes the main living area is the best spot, with the indoor head mounted high on a wall where the air can flow across the whole room. Avoid tight corners or behind doors. In our damp climate we also think about where the unit can pull moisture out, not just push heat around.
Do I need consent to install a heat pump in Auckland?
For a standard high wall heat pump you generally don't need building consent in Auckland. We handle the install to the manufacturer's specs and the electrical rules. Larger or ducted systems and anything structural can be different, so we'll flag it if your job needs anything extra.
Can you install a heat pump in an older villa?
Yes. We fit plenty of heat pumps in older villas and bungalows around Ponsonby and Grey Lynn. Weatherboard walls and minimal insulation make sizing more important, not less, because heat escapes faster. We size for that so the room actually holds its warmth.
Ready for a warmer, drier home?
We install across Auckland, from Titirangi to Howick. Tell us about your place and we'll sort a quote. Not sure which room or unit yet? Start with the cost guide or the sizing calculator and we'll take it from there.